Used Equipment
Texas Extrusion Service also provides high-quality used equipment for sale.
Check out our current inventory, which includes extruders, gearboxes, motors, and other various parts.
Need more information? Give us a call at 281‑350‑2288
J25124A 4.5" Davis Standard Gearbox
Model: 45T
SN: 00104343-1-1
Ratio: 17.49/1
HP Capacity: 400
Service Factor: 1.5
Manufacture date: 12/2015
*Gearbox has no oil pump. When the gearbox is purchased, we will install a new pump and filter assembly.
Note: There are options for repairs, call us for pricing.
4.5" Davis Standard J25125A
4.5″ Davis Standard Gearbox
Model: 45IN45HT
SN: N5869
Ratio: 17.36/1
HP Capacity: 300
Service Factor: 1.5
Manufacture date: 8/1993
*Gearbox has oil pump and filter assembly.
Note: There are options for repairs, call us for pricing.
4.5" Davis Standard Feed Throat J25125B
4.5″ Davis Standard Feed Throat
Uses a labyrinth seal which is worn and would need to be replaced. (Shaft diameter is 7.750″)
The liner measures 4.516″ but has some grooves and corrosion. Recommend new liner and bushing replacement.
Feed throat uses 1″ barrel bolts and 5/8″ hopper bolts.
Note: There are options for relining/repairs, call us for pricing.
4.5" Davis Standard Feed Throat J25124B
4.5″ Davis Standard Feed Throat
Uses oil lip seals instead of a labyrinth seal. (Shaft diameter is 7.750″)
The liner measures 4.513″ but has some grooves and corrosion. Recommend new liner and bushing replacement.
Feed throat uses M24 barrel bolts and M16 hopper bolts.
Note: There are options for relining/repairs, call us for pricing.
J25124C 4.5" 32/1 Davis Standard Feedscrew
Tapered 4-key drive shank
161″ overall length
144.875″ flighted length
Note: There are options for refurbishing, call us for pricing.
J25125C 4.5" 32/1 Davis Standard Feedscrew
Tapered 4-key drive shank
161″ overall length
144.875″ flighted length
Note: There are options for refurbishing, call us for pricing.
J25125D Refurbished 4.5" 32/1 Davis Standard Feedscrew
Tapered 4-key drive shank
161″ overall length
144.875″ flighted length
Baldor 250HP AC Drive Motor (gray)
Frame: 449T
J25143 50mm 28/1 Pelletizing Extruder
Gearbox
– Manufacturer: Zambello
– Model: RPU2/160E/A
Serial: L9504
– Ratio: 10/1
50HP AC Drive Motor
3 heat zones
Air-cooled heater system
Includes side feed fluff hopper system with an auger feeder underneath the hopper.
David Brown VSH-1-1 DS4
Cast Aluminum Heaters
Bolt Clamping
8" Gloucester Gear Case
Mfr date 08/02
Gear Case ration 25.1/1
24″ bolt circle
7-7/8″ quill ID